Ariston 100 L User Manual (English)

Other manuals for Ariston 100 L

Questions and Answers:

J
Jennifer McdanielSep 4, 2025
Why is my Ariston 100 L Water Heater producing boiling water?
- T
  theresa74Sep 4, 2025
  If your Ariston Water Heater is producing boiling water or steam from the taps, it could be due to: * A faulty component. If the component is faulty, replace it. * Incorrect positioning of a component. Place the component in the right position. * High level of scaling in the boiler and components. Ensure water with proper hardness degree. * A malfunctioning component. If the component is faulty, replace it.
U
uandersonSep 5, 2025
Why does my Ariston 100 L Water Heater have increased noise from the external unit?
- M
  Mark BrownSep 5, 2025
  If you notice increased noise from the external unit of your Ariston Water Heater, it might be due to: * Component vibration. Ensure all screws are tightened. * Physical obstructions blocking fan blades. Clean the component. * Partial clogging due to ice, leaves, or dirt. Clean the component.
T
Travis BurnettSep 6, 2025
Why is my Ariston 100 L frequently using electrical resistance?
- A
  aharrisonSep 7, 2025
  If your Ariston Water Heater is frequently using electrical resistance, it could be because: * The “Time W” value is too low. Increase the availability of heating time. * The air temperature is out of range. * It has not been 8 days since the first installation, a change of the Time-W parameter, a power outage, or if the P7 parameter is set to OFF and the outside air temperature is below 10°C. Wait 8 days and recheck.
M
Maria MoonSep 8, 2025
What to do if air sensor is not working in Ariston 100 L Water Heater?
- W
  William GarzaSep 8, 2025
  If the air sensor in your Ariston Water Heater is malfunctioning, it could be due to: * A faulty component. If the component is faulty, replace it. * Incorrect positioning. Place the component in the right position.
T
Tammy SmithSep 9, 2025
How to troubleshoot the evaporator sensor on Ariston Water Heater?
- K
  Kimberly FrankSep 10, 2025
  If the evaporator sensor in your Ariston Water Heater is not working correctly, it could be due to: * A faulty component. If the component is faulty, replace it. * Incorrect positioning. Place the component in the right position.

Ariston 100 L Specifications

General

Power Source	Electric
Pressure Rating	8 bar
Capacity	100 L
Type	Storage Water Heater
Thermostat	Adjustable
Temperature Range	Up to 75°C
Insulation	Polyurethane Foam
Warranty	2 years
Dimensions	Varies by model (approx. 913mm x 450mm x 480mm)
Weight	Varies by model (approx. 27 kg)

Ariston 100 L Technical Manual

Table of Contents

Other manuals for Ariston 100 L

Questions and Answers:

Ariston 100 L Specifications