Ariston 3318601 - Initial Setup: Date and Time; Setting the Day of the Week; Setting the Current Time

23
GB
setting the date and time
During the initial start-up of the timer-
thermostat, it is necessary to set the
date and current time.
Open the front fl ap of the timer-thermo-
stat.
To set the correct day, press the “DATE/
DAY“ button.
The display will visualise the fl ashing
day cursor.
Repeatedly press the “DATE/DAY“ but-
ton until reaching the correct position,
according to the following sequence:
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday
Press the OK button to confi rm the set-
ting.
To set the current time, press the “TIME“
button.
The time will fl ash on the display.
Press the “+” or “-” buttons to set the
exact time.
Press the OK button to confi rm the set-
ting.
At this stage, the information will appear
on the display and the timer-thermostat
will be ready for use.
By pressing the “
” button, the central
heating will operate according to the de-
fault schedule.
Note: the pre-set central heating sched-
ule is designed to satisfy average com-
fort standards.
To exit or cancel the setting, press one
of the operating mode buttons: “
“, “
“, “ “.
COPY
DAY
DATE/
DAY
1..6
PROGRAM
TIME
1234567
OK?
CO
COPY
CO
CO
CO
DAY
D
567
COPY
DAY
DATE/
DAY
1..4
PROGRAM
TIME
1234567
OK?
Y
DAY OF THE WEEK
SETTING
CURRENT TIME
SETTING