28
GB
special functions
HOLIDAY function
The Holiday function allows for setting
a constant temperature (predefi ned =
10°C) for a certain number of days (from
1 to 99).
This allows for saving energy and the
relative costs when the inhabitants are
away on holiday. Once the pre-set days
expire, the timer-thermostat will re-
sume operating in the “
"AUTO" or “
MANUAL" mode, depending on the
previous settings.
To set the holiday function:
- Check that the timer-thermostat is op-
erating in the AUTO or MAN mode.
- Press the “ “ button.
The display will visualise the “ “
symbol, the number of days of holiday
and the temperature setting.
- Press the “TIME “ buttons.
Set the holiday period (from 1 to 99
days) then press OK to confi rm.
- Press the “
“ buttons and set
the value of the desired room tempera-
ture to be maintained throughout the
holiday period.
Press the OK button to confi rm.
The timer-thermostat checks the new
temperature for the pre-set number of
days in which the house will be empty.
At midnight every day, the timer-ther-
mostat reduces the holiday period by
one day at a time until the number of
pre-set days drops to zero.
The timer-thermostat then resumes the
previously set operating mode.
To cancel or exit the HOLIDAY function at
any time, press the “ “ button a sec-
ond time.
COPY
DAY
DATE/
DAY
1..6
PROGRAM
TIME
1234567
AUTO
DAYS
OK?
1..4
PROGRAM
1234567
AUTO
DAYS
HOLIDAY FUNCTION
SETTING
TEMPERATURE
MODIFICATION
To Next Page
Loading...
