26
GB
modifying the central heating schedule
Copying the day schedule
The time slots relative a certain day can
be copied to another day.
Press the PROGRAM “ “ buttons
then press the COPY DAY button: the
display will visualise the cursor of the
day to be copied (not fl ashing), and the
cursor of the day to which the fl ashing
schedule must be copied.
To select another destination day, press
the DATE/DAY button until the "fl ashing"
day indicator is beneath the desired day
then press OK to confi rm.
Note: After the confi rmation, the desti-
nation day can be copied by pressing the
COPY DAY button again.
To exit or cancel the setting, press one
of the operating mode buttons: “
“, “
“, “ “.
Deactivation / Activation of the time
slots
Up to 6 time slots can be scheduled
every day. Depending on personal heat-
ing requirements, certain time slots can
be activated or deactivated. Any period
between 2 and 5 can be deactivated or
reactivated in the central heating sched-
ule profi le.
Press the PROGRAM “ “ buttons
to select the desired time slot (between
1 and 6) highlighted by the fl ashing box.
Press and hold the “ “ button for a few
seconds: the selected time slot will dis-
appear from the display.
To once again activate the period, per-
form the same procedure by selecting
the deactivated time slot with the PRO-
GRAM “ “ buttons, then press and
hold the “ “ button for a few seconds.
COPY
DAY
DATE/
DAY
1..6
PROGRAM
TIME
1234567
567
To Next Page
Loading...
