Ariston ARWL 129 - Cycle Operation and Indicator Lights; Detailed Indicator Light Meanings; Step-by-Step Wash Cycle Start

8
NA
Indicator lights
Theindicatorlightsprovideimportantinformation.
This is what they can tell you:
Delayed start
IftheDELAYTIMERfunctionhasbeenactivated(see “Per-
sonalisation”), after the wash cycle has been started the
indicator light corresponding to the selected delay period
will begin to flash:
Astimepasses,theremainingdelaywillbedisplayedand
the corresponding indicator light will flash:
Oncethesetdelayhaselapsed,theflashingindicatorlight
willswitchoffandtheselectedwashcyclewillbegin.
Wash cycle phase indicator lights
Oncethedesiredwashcyclehasbeenselectedandhasbe-
gun, the indicator lights switch on one by one to indicate which
phaseofthecycleiscurrentlyinprogress.
Function buttons and corresponding indicator
lights
When a function is selected, the corresponding indicator
lightwillilluminate.
If the selected function is not compatible with the program-
med wash cycle, the corresponding indicator light will flash
andthefunctionwillnotbeactivated.
If a function which is incompatible with another function
selected previously, only the most recent selection will
remainactive.
Door locked indicator light
If this indicator light is on, the appliance door is locked to
prevent it from being opened accidentally; to avoid any
damage, wait for the indicator light to switch off before you
opentheappliancedoor.
N.B. IftheDELAYTIMERfunctionisactivated,thedoor
cannot be opened; pause the machine by pressing the
START/PAUSEbuttonifyouwishtoopenit.
!IftheSTART/PAUSEindicatorlight(orange)flashes
rapidly at the same time as the function indicator light, this
indicates a problem has occurred (see “Troubleshooting”).
Starting a wash cycle
1. SwitchthewashingmachineonbypressingtheON/OFFbutton.Allindicatorlightswillswitchonforafewseconds,then
theywillswitchoffandtheSTART/PAUSEindicatorlightwillpulse.
2.Loadthelaundryandclosethedoor.
3.SettheWASHCYCLEknobtothedesiredprogramme.
4. Set the washing temperature (see “Personalisation”).
5. Set the spin speed (see “Personalisation”).
6. Measure out the detergent and washing additives (see “Detergents and laundry”).
7.Selectthedesiredfunctions.
8.StartthewashcyclebypressingtheSTART/PAUSEbuttonandthecorrespondingindicatorlightwillremainlitinafixed
manner,ingreen.
Tocancelthesetwashcycle,pausethemachinebypressingtheSTART/PAUSEbuttonandselectanewcycle.
9.Attheendofthewashcyclethe indicatorlightwillswitchon.TheDOORLOCKEDindicatorlightwillswitchoff,indi-
catingthatthedoormaybeopened.Takeoutyourlaundryandleavetheappliancedoorajartomakesurethedrumdries
completely.
SwitchthewashingmachineoffbypressingtheON/OFFbutton.
Wash
Rinse
Spin
Drain
End of wash cycle