19504259100 English {PDF Created 13/11/04 12:27}
Troubleshooting
ne day your dryer seems not to be working. Before you call your Service Centre
(see Service),
go through the
ollowing troubleshooting suggestions.
Problem:
The dryer won’t start
Drying cycle will not begin.
It is taking a long time to dry
Possible causes / Solutions:
•
The plug is not plugged into the socket, or not making contact.
•
There has been a power failure.
•
The fuse has blown. Try to plug another appliance into the socket.
•
You are using an extension cord. Try to plug the dryer’s power cord
directly into the socket.
•
The door is not closed securely.
•
The PROGRAMMES knob has not been set properly
(see Start and
Programmes).
•
The START button has not been pressed
(see Start and
Programmes).
•
You have set a delay time
(see Start and Programmes).
•
The filter has not been cleaned
(see Maintenance).
•
The temperature setting is not ideal for the type of fabric you are
drying
(see Start and Programmes).
•
Auto Programmes require a
HIGH temperature setting
(see Start and Programmes).
•
The correct program has not been selected for this load
(see Start and Laundry).
•
The flexible vent tube is obstructed
(see Installation).
•
The air intake vent is obstructed
(see Installation).
•
The permanent Ventilation flap on the storm cover is obstructed
(see Installation).
•
The items are too wet
(see Laundry).
•
The dryer is overloaded
(see Laundry).
GB
TD4007 Issue 1