19504259100 English {PDF Created 13/11/04 12:27}
Dryer Description
TD4010 Issue 1
The front
The back
Control Panel
The START button begins drying a selected
programme
(see Start and Programmes).
The HEAT button selects drying temperature
(see Start and Programmes).
Out: HIGH heat.
In: LOW heat.
The ALARM buzzer signals the end of a drying cycle.
OUT: buzzer On. IN: buzzer Off.
The
ACTIVE indicator light signals that your dryer is in
use. This light will glow when the start switch is
pressed. It will remain on until the door is opened or the
power is turned off. This light will be on during a
delayed start
programme.
The
Drying Guide
allows you to consult a user
friendly table of fabric types and load capacities.
The TIMER knob sets a delay on the dryer’s start time.
Rotate it clockwise until you reach the number of hours
you want to delay the start time. If you’ve gone too far,
turn the knob counter-clockwise
(see Start and
Programmes).
The PROGRAMMES knob sets the programme: rotate
it clockwise, never counter-clockwise, until the indicator
is pointing to the programme you want to select
(see
Start and Programmes).
GB
To Next Page
Loading...
Need help?
General