Do you have a question about the Ariston EGIS PREMIUM Series and is the answer not in the manual?
Guidelines and responsibilities for qualified installers.
Crucial safety rules to prevent injury and damage during installation and operation.
Explanation of the boiler's control panel buttons and display.
Diagram showing the external components of the boiler.
Diagrams showing the external dimensions of the boiler.
Detailed technical data, performance, and emission values for the boiler models.
Essential checks and preparations before installing the boiler.
Procedures and requirements for connecting the gas supply.
Procedures and requirements for connecting the water supply.
Instructions for fitting the safety valve drain pipe.
Recommendations for treating water in the heating circuit for optimal operation.
How to properly install the condensate discharge pipe and siphon.
Diagram illustrating the boiler's water circuit and component connections.
Guidelines for connecting the flue gas exhaust and air intake systems.
Instructions and safety precautions for electrical wiring and connections.
How to access and connect external control units and sensors.
Diagram showing the boiler's electrical wiring and connections.
Steps for safely starting the boiler for the first time.
Procedure for filling the heating circuit with water and removing air.
Steps for verifying and adjusting combustion for optimal efficiency.
Guide to accessing the advanced settings menu using codes.
Explanation of the automatic function for adapting to external conditions.
Explanation of boiler safety shut-offs and error code meanings.
Description of the anti-frost function and its operating conditions.
Guide to navigating menus and accessing parameters.
Overview of important adjustable parameters like ignition, power, and temperature settings.
Adjusting heating curves and temperature settings for Zone 1.
Information on using test modes such as Spazzacamino and air purge.
Steps to safely open the boiler casing for inspection and maintenance.
Recommended annual checks and general maintenance advice.
Steps for cleaning the primary heat exchanger and siphon.
Procedures for functional testing, draining, and important user information.
Explanation of symbols found on the boiler's data plate.