20
launam s’resu用户手册
User Settings
To access to the User’s settings
press the OK button, the display
shows:
Press the OK button to access the menu and the sub-menu.
Turn the encoder to navigate into the menu and the sub-menu.
Turn the encoder to change the setting of the parameters.
Press the OK button to save the new settings.
Press the ESC button to exit until the normal display screen is
restored.
Encoder
ESC button
OK button
Impostazione acqua calda
Impostazioni schermo
Guida
Impostazione riscaldamento
Set Language display
To set the Display Language, access the User’s Menus and proceed
as follows:
- press the OK button, the display show Complete Menu
- press the OK button, to access the Complete Menu
- turn the econder to select “Screen settings”
- press the OK button, to access the sub-menus
- press the OK button to access the sub-menu “Language”
- press the OK button to select “English” the dispaly show
“Selected language English”
- press the ESC button to exit the menu.
Set the time and date
To set the Time and Date , access the User’s Menus and proceed as
follows:
- press the OK button, the display show Complete Menu
- press the OK button, to access the Complete Menu
- turn the encoder to select “Screen settings”
- press the OK button, to access to the Screen settings
- turn the encoder to select “Time and Date”
- press the OK button, to access the sub-menus
ashes)
- turn the encoder to set the day
rm
- turn the encoder to select the month
- press the OK button to enable to set the month (the number
ashes)
- turn the encoder to set the month
rm
- turn the encoder to select the year
ashes)
- turn the encoder to set the year
rm
- turn the encoder to select the hour
ashes)
- turn the encoder to set the hour
rm
- turn the encoder to select the minutes
- press the OK button to enable to set the minutes (the number
ashes)
- turn the encoder to set the minutes
rm
- press the ESC button to exit the menu.
ed using the
g. below).
Complete Menu
用户设置
按OK 键进入用户设置,
显示屏显示:
Complete Menu
按 OK 键进入菜单和子菜单。
旋转旋钮选择菜单和子菜单。
旋转旋钮改变参数的设置。
按OK 键保存新的设置。
按 退出键退出直至正常的显示屏内容。
使用OK键和旋钮可以进入和修改许多参数,见下图:
编码器旋钮
退出键
OK 键
Impostazione acqua calda
Impostazioni schermo
Guida
Impostazione riscaldamento
设置显示的语言
通过下面的方式进入用户菜单,设置显示语言:
- 按OK 键, 显示屏显示
Complete Menu
- 按OK 键, 进入
Complete Menu
- 旋转旋钮选择 “Screen settings”
- 按OK 键, 进入子菜单
- 按OK 键,进入子菜单
“Language”
- 按OK 键选择 “English” 显示屏显示 “Selected language English”
- 按退出键退出菜单。
设定时间和日期
通过下面的方式进入用户菜单,设置时间和日期:
- 按OK 键, 显示屏显示
Complete Menu
- 按OK 键, 进入 Complete Menu
- 旋转旋钮选择 “Screen settings”
- 按OK 键,进入 Screen settings
- 旋转旋钮选择 “Time and Date”
- 按OK 键, 进入子菜单
按OK 键,进入天数设置(数字在闪烁)
- 旋转旋钮设置天数
按OK 键确认天数
- 旋转旋钮选择月数子菜单
- 按OK 键,进入月数设置(数字在闪烁)
- 旋转旋钮设置月数
按OK 键确认
- 旋转旋钮选择年数子菜单
按OK 键,进入年数设置(数字在闪烁)
- 旋转旋钮设置年数
按OK 键确认
- 旋转旋钮选择小时子菜单
按OK 键,进入小时设置(数字在闪烁)
- 旋转旋钮设置小时
按OK 键确认
- 旋转旋钮选择分钟子菜单
- 按OK 键,进入分钟设置(数字在闪烁)
- 旋转旋钮设置分钟
按OK 键确认
- 按退出键退出菜单。