16
launam s’resu用户手册
24/01/2012 15:22
40°C 72°C
24/01/2012 15:22
40°C 70°C
01/01/2000 00:00
44°C
the heating
the heating, press the
MODE button 9; the heating operation
symbol
will disappear from the
display.
The boiler remains active only for the
production of domestic hot water,
indicating the set temperature.
Adjusting the heating
It is possible to set the temperature
of the heating water by pressing the
buttons 12 +/-.
The temperature that may be obtained.
which varies from 20°C to 45°C (low
temperature) or 40°C to 82°C (high
temperature).
ash on
the display.
Domestic hot water temperature
adjustment
with an external tank connected- option
It is possible to set the temperature of
the domestic hot water by pressing
the buttons 2 a temperature may be
obtained which varies from 40°C to
60°C.
ash on
the display.
To exclude the tank, select operating
mode Only Heating.
the boiler
the boiler press the ON/
OFF button
, the display will switch
.
The Anti-frost Function is allready
active.
ATTENTION!!
the boiler completely by
switching the external electrical switch
the gas
valve.
OFF
供暖温度调节
可以通过键12+/-来调节供暖温度
温度设定值从 20°C 到 45°C (低温)
或 40°C 到82°C (高温).
数值设定时将在显示屏上闪烁。
生活热水温度调节
可以通过键2+/-来调节热水温度
温度设定值从 40°C 到 60°C .
数值设定时将在显示屏上闪烁。
需连接一个外置的储水罐
如无储水罐时，请选择单采暖模式。
关闭供暖
按模式键９，关闭供暖，
供暖模式标志 从显示屏中消失。
锅炉仅保留生活热水功能，
显示生活热水的设定温度。
关 闭 锅炉
按电源键 ，显示屏将关闭。
防冻功能仍然有效。
防冻功能激活条件：
1：有燃气供应；2：有电源提供。
注意：
要完全关闭热水炉，
请断开外部电源插头，关闭燃气阀。
（冬季如果要完全关闭热水炉，
请排空系统里的水，否则有冻坏
热水炉及管路的风险）。
To Next Page
Loading...
Need help?
General