REPAIR MANUAL
Page: 11
13. FLOAT SWITCH and PRESSURE SWITCH
• To access the Float Switch or Pressure Switch, first remove the Toe Kick (see Section 10) and the Door Extension (see Section
11) then remove the four (4) Phillips screws that hold the Lower Access Panel to the Dishwasher (Fig. 13-1). With the screws
removed the Lower Access Panel can be moved down and out allowing access to the two components (Fig. 13-2).
Float Switch: (Fig. 13-3) Can be checked for continuity or for water in the Base Pan.
Pressure Switch: (Fig.13-4) Can be checked for continuity.
Fig. 13-1
Fig. 13-2
Fig. 13-3
Fig. 13-4
L 63 / LL 64 / LL 65
LI 640 / LI 670 / LI 700
To Next Page
Loading...
