REPAIR MANUAL
Page: 15
17. MAIN MOTOR and PUMP
• To remove the Main Motor and Pump Assembly (Fig. 17-1), first remove the Vibration Damper from the rear of the Motor by prying
it away from the Motor with a screwdriver (Fig. 17-2). Next remove the Motor and Pump Assembly from the three (3) hose
connections (Fig. 17-3) See TECH NOTE below.
TECH NOTE: The Motor Assembly can be removed from the three (3) hoses without undoing the Hose Clamps. Easily work the
Pump out and off the Hoses, the Clamps can now be reused if necessary.
Fig. 17-1
Fig. 17-2
Fig. 17-3
L 63 / LL 64 / LL 65
LI 640 / LI 670 / LI 700
To Next Page
Loading...
