EN
9
CYCLES TABLE
1. ECO - Eco programme is suitable to clean normally soiled tableware, that for this use, it is the most ecient programme in terms of its com-
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
2. AUTO-INTENSIVE - Automatic program for heavily soiled dishes and pans (not to be used for delicate items).
3. AUTO-MIXED- Automatic program for normally soiled pans and dishes.
4. AUTO-FAST WASH -
Automatic program for limited quantity of normally soiled crockery. Ensures optimal cleaning performance in short time.
5. DELICATES - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
6. EXPRESS 30’ - Program to be used for half load of lightly-soiled dishes with no dried food residues. Does not include drying phase.
EXTRA CYCLES
7. GOOD NIGHT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest
noise emission.
8. SANITIZING -
Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the dishwasher.
9. SOAK - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
10. SELF CLEAN - Program to be used to perform maintenance of the dishwasher, to be carried out only when the dishwasher is EMPTY using
specic detergents designed for dishwasher maintenance.
Notes:
Please note that cycle EXPRESS 30’ is dedicated for lightly soiled dishes.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Note for Test Laboratories: For information
on comparative EN testing conditions, please send an email to the following address: assistenza_en_lvs@indesitcompany.com
Pre-treatment of the dishes is not needed before any of the programs.
* Not all options can be used simultaneously.
** Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options
and sensor calibration. The sensor calibration can increase program duration up to 20 min.
CYCLES TABLE
CYCLE Available options
*
Drying
phase
Active-
Dry
Duration of
wash cycle
(h:min)
**
Water
consumption
(l/cycle)
Energy
cosumption
(kWh/cycle)
ECO
50°
TABLET, START DELAY, EXTRA DRY,
3:20 11.0 0.86
AUTO-INTENSIVE
65 °
3D ZONE WASH, ZONE WASH, TABLET,
START DELAY, TURBO, EXTRA DRY
2:00 - 3:10 14.0 - 17.0 1.50 - 1.85
AUTO-MIXED
55°
3D ZONE WASH, ZONE WASH, TABLET,
START DELAY, TURBO, EXTRA DRY
1:30 - 2:30 14.5 - 16.0 1.15 - 1.30
AUTO-FAST
WASH 50°
TABLET, START DELAY
- - 0:55 - 1:20 13.0 - 14.5 1.15 - 1.25
DELICATES
45°
ZONE WASH, TABLET, START DELAY,
EXTRA DRY
1:40 11.5 1.20
EXPRESS 30’
50°
ZONE WASH, TABLET, START DELAY
- - 0:30 9.0 0.50
EXTRA CYCLES - available by pressing button
GOOD NIGHT 50°
TABLET, START DELAY, EXTRA DRY
3:30 15.0 1.15
SANITIZING 65°
START DELAY
- 1:40 10.0 1.30
SOAK cold
ZONE WASH, START DELAY
- - 0:12 4.5 0.01
SELF CLEAN 65°
START DELAY
- - 0:50 8.0 0.85
To Next Page
Loading...
Need help?
General
