Ariston MICROCOMBI 23 MFFI User Manual

ADJUSTING THE HEATING
It is possible to set the temperature of
the heating system by adjusting the
knob “B”.
By positioning the
indicator somewhere
between 1 and 9, a
temperature may be
obtained which varies
from approximately
40˚C to about 80˚C.
EXTERNAL (ROOM) THERMOSTAT
CONTROL
If an external (room) thermostat is
installed, it is recommended that the
temperature of the heating system be
set by means of the “B” knob, leaving
it at 7-8 position in order to obtain the
best performance from the boiler and
to allow the regulation of the external
temperature to function efficiently.
SETTING THE HOT WATER FOR
DOMESTIC USE
Both in the winter and summer mode,
the temperature of the domestic hot
water may be adjusted by using the
“C” knob. A delivery
temperature for the
water may be chosen in
a range from 36˚C to
about 56˚C, depending
on the flow rate of the
water and the position
of the knob between 1
and 9 settings.
11
B
C
UT004A
UT005A

Ariston MICROCOMBI 23 MFFI Specifications

General

Brand	Ariston
Model	MICROCOMBI 23 MFFI
Category	Boiler
Language	English