Ariston microGENUS II 31 MFFI - 6.5.6 REMOVING THE PRESSURE GAUGE; 6.5.7 REMOVING THE EXPANSION VESSEL

6.5.7 Removing the expansion vessel
1. Release nut “J1” (FIG. 6.56);
2. Remo
ve back-nut “K1” (F
IG.
6.57);
3. Remove the expansion vessel (FIG. 6.58).
6.5.6 Removing the pressure gauge
1. Remove the U-clip “I1” (FIG. 6.53)
2. Lift the pressure gauge from the rear of the control
panel using a screwdriver (FIG. 6.54-6.55).
FIG. 6.56
I1
FIG. 6.54
FIG. 6.55
J1
FIG. 6.57
FIG.
6.58
K1
FIG. 6.53