Ariston microGENUS II 31 MFFI - 6.5.8 REMOVING THE OVERHEAT THERMOSTAT; 6.5.9 REMOVING THE C.H. TEMPERATURE PROBE (N.T.C.)

6.5.8 Removing the overheat thermostat
1. Disconnect the overheat thermostat electrical
connections
“L1” (F
IG.
6.59);
2. Then remove the thermostat from its mounting by
releasing the securing clip (FIG. 6.60-6.61).
6.5.9 Removing the C.H. temperature probe (N.T.C.)
1. Pull off the electrical connector and remove the sensor
probe
.(F
IG.
6.62-6.63).
FIG. 6.59
FIG. 6.60
L1
FIG. 6.62
FIG. 6.63
FIG.
6.61