GB
9
Starting
As already said the starting is carried out moving the switch F fig.
7 from position 0 to position I.
The warning light remains on only during heating phase.
The thermostat will automatically disconnect the heating element when
the selected operating temperature is reached.
Instructions for use (user)
Regulation of
the operating
temperature
The regulation of the temperature is carried on turning the handle M fig.
7 on the front of the cap:clockwise to increase temperature, anticlock wise
to decrease it.
Position E is the ideal working temperature (55° - 60° C).
This temperature gets the optimum performance from the apparatus with
a notable energy saving and longer life of the water heater.
The data and specifications indicated are not binding and the Producer
reserves the right to carry out any modifications that may be required
without prior notice or replacement.
To Next Page
Loading...
Need help?
General
