Ariston TRIAL 80 XD0C-O User Manual

CLIMATIZZATORE D’ARIA
AIR CONDITIONER / CLIMATISEUR / CLIMATIZADOR
CONDICIONADORE DE AR / AIRCONDITIONING
MANUALE D’USO E INSTALLAZIONE
USER AND INSTALLATION MANUAL
CONSOLE R32
REFRIGERANTE R32
REFRIGERANT R32
R32
FOLLOW ME
MEMORY

Ariston TRIAL 80 XD0C-O Specifications

General

Heating Capacity	2.5 kW
Power Supply	220-240 V, 50 Hz
Refrigerant	R410A
Type	Split System
Noise Level (Outdoor)	50 dB
Operating Temperature (Cooling)	18°C to 43°C
Operating Temperature (Heating)	24 °C

Summary

INTRODUCTION

OPERATING AND MAINTENANCE INSTRUCTIONS

Information for operating, checks, and maintenance procedures.

INSTALLATION

Instructions for professional installers for optimal installation.

OPERATING AND MAINTENANCE INSTRUCTIONS

SAFETY STANDARDS

Guidelines to prevent injury and damage during operation.

OPERATION

Basic functions

Special functions

SIMPLE MAINTENANCE

Cleaning the filters

Cleaning the air conditioning unit

END OF SEASON MAINTENANCE

If the air conditioning unit does not work

Steps to take if the unit shows no signs of life or poor performance.

INSTALLATION

1.1 Installation area

1.2 Minimum distances

SAFETY STANDARDS

General safety precautions during installation

Precautions for safe installation work, tools, and heights.

Further safety precautions for installation and operation

Refrigerant safety and room area requirements

1.3 Positioning the internal unit

1.4 Installing the internal unit

1.5 Installing the external unit

PIPING AND CONNECTIONS

2.1 Connecting the refrigeration piping

How to connect the refrigerant pipes to the units.

2.2 Draining the condensation from the internal unit

2.3 Draining the condensation from the external unit

2.8 Connections to the external unit

2.9 Creating a vacuum and checking the seal

2.10 Recovering the refrigerant

2.11 Charging the refrigerant gas

Steps for charging the system with refrigerant gas.

ELECTRICAL CONNECTIONS

3.1 Connecting the internal unit

Steps for connecting electrical wires to the internal unit.

3.2 Connecting the external unit

3.3 Connecting to the mains electricity supply

Guidelines for connecting the unit to the main power supply.

FINAL STAGES

4.1 Testing

Checks to perform after installation to ensure proper operation.

CHECKS WITHOUT THE USE OF TOOLS OR INSTRUMENTS

Operation in Cooling mode - Visual checks on the Internal Unit

TROUBLESHOOTING - electrics

Troubleshooting electrical problems with the unit and remote.

SCHEMI ELETTRICI - WIRING DIAGRAMS - SCHÉMAS ÉLECTRIQUES

UNITÁ INTERNA/ INDOOR UNIT/ UNITE INTERNE/

UNITÁ ESTERNA/ OUTDOOR UNIT/ UNITE EXTERNE/

DUAL 50 XDOC-O

TRIAL 80 XDOC-O

QUAD 110 XDOC-O

PENTA 121 XD0C-O