Need help?Do you have a question about the Aritech DT2063N and is the answer not in the manual?
General| Coverage Angle | 90° |
|---|---|
| Power Supply | 9-16 VDC |
| Type | Dual Technology Detector |
| Detection Technology | PIR and Microwave |
| Tamper Switch | Normally Closed (NC) |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Humidity | 95% non-condensing |
| Mounting Height | 2.2m to 2.5m (7.2ft to 8.2ft) |
| LED Indicators | Alarm |
Instructions for inserting and securing the detector head into the mounting base.
Steps to detach a detector that has been secured with a locking tab.
Guidance on assigning unique addresses to detectors using rotary dials.
Explanation of the detector's LED indicators for alarm status.
Guidelines for basic upkeep and inspection of the detector.
Detailed steps for replacing the detector's optical chamber.
To Next Page
