To Next PageTo Next PageWhat to do if Arizona Instrument JEROME J605 Measuring Instruments says 'No USB Drive is connected'?
If your Arizona Instrument Measuring Instruments displays 'No USB Drive is connected or USB Drive is full', ensure that the USB drive is connected and has available space.
General| Brand | Arizona Instrument |
|---|---|
| Model | JEROME J605 |
| Category | Measuring Instruments |
| Language | English |
Turn on the instrument and check display for serial number and software revision.
The instrument is not designed for explosive environments.
Press the SAMPLE button to initiate a sampling cycle for H2S measurement.
Perform sensor regeneration at the beginning of each day for optimal performance.
Caution that the instrument is for gaseous vapor use only and not liquids or dust.
Details and explains all elements displayed on the J605 main screen.
Start the sensor regeneration process to clean the sensor.
Set high and low alarm thresholds for hydrogen sulfide concentration.
Crucial warning to prevent sensor damage by not leaving H2S on the sensor overnight.
Explains the 4-20mA analog output for industrial systems and its scaling.
Use of the Functional Test Module to verify instrument operation between calibrations.
Solutions for issues like the instrument not turning on or the battery not holding a charge.
Solutions for airflow restrictions, erratic results, and contamination.
Step-by-step guide to install the necessary USB driver for PC connectivity.
