KM-30S User Manual V1.22
1. Introduction
KM-30S controller is an intelligent door control board designed for automatic telescopic lift doors with 220 V
AC
reduction gear
motor. It provides advance features for high comfort, high dynamic performance, and flexible usage.
• KM-30S provides complete hold of the motor with its vector control and high-resolution encoder input hardware.
• In addition to this hardware, it allows swift but comfortable motion of doors with its software that provides Softening
in travel ramps and which has the algorithm that does not require limit switches.
• It provides features for auto-learning of door travel limits without open-close limit switches.
• In order to work with the control panels in complete harmony it can generate Doors are completely open, Doors are
fully closed and Obstruction or photocell detected signals. These signals enable it to work for fire lift doors.
• KM-30S door controller is suitable for use on fire lift doors.
• A nudging function is included with buzzer sound and slow speed closing after a long-time photocell interrupt.
• When the door is jammed, the buzzer is turned back on. It passes slowly through the obstruction area to prevent damage
the passengers and the door.
• It provides a parameter menu which has access levels for expert, user/customer needs and easy adjustment.
• It provides many functions and parameters for manufacturing companies that enable application flexibility, like motor
reduction ratio, motor revolution, motor sheave circumference and skate open zone.
• It provides user friendly parameter setting with speed units in cm/s and travel distance units in cm.
• It provides counters for the information of opening-closing times.
• KM-30S keypad allows access to all its parameters, functionality and monitoring screens.
• Door speed, door position and operating status in normal operation, and error in error status are displayed on the screen.
To Next Page
