Arlo Ultra - SmartHub settings; Change the SmartHub name; Adjust the SmartHub flicker setting

48Change Your Settings
Arlo Ultra Camera
User Manual
You can also control whether the spotlight comes on automatically when your Arlo
Ultra camera detects motion at night.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Video Settings > Low Light Settings.
5. Tap Spotlight.
The Spotlight setting toggles off and on. When the Spotlight setting is set to the
On position, the spotlight automatically turns on when your Arlo camera detects
motion at nigiht.
SmartHub settings
You can view or change SmartHub settings.
Change the SmartHub name
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the SmartHub.
4. Tap Edit
next to the SmartHub name.
5. Enter a new name for the SmartHub.
6. Tap Save.
Adjust the SmartHub icker setting
The combination of certain articial light sources and the camera shutter speed might
result in ickering in recorded video. The default setting for the SmartHub is Auto, but
you can change the icker adjustment.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the SmartHub.