Arlo VMC2020 - Two-Step Verification Setup; Biometric Authentication Setup

DRAFT
Essential Camera
Change Your Settings
33
User Manual
Set up two-step verification
1. Open the Arlo app.
2. Tap Settings .
3. In the ACCOUNT section, select Profile > Login Settings > Two-Step Verification .
4. Tap the switch next to Enable.
5. Select your verification method.
Note: Your Arlo account email is an automatic back-up option.
6. Follow the instructions in the app to complete your two-step verification setup.
Add a phone number or device to two-step verification
1. Open the Arlo app.
2. Tap Settings .
3. In the ACCOUNT section, select Profile > Login Settings > Two-Step Verification .
4. To add a phone number, tap Add SMS Verification and enter the phone number.
5. To add a trusted device, tap Add Trusted Device .
Remove a phone number or device from two-step verification
1. Open the Arlo app.
2. Tap Settings .
3. In the ACCOUNT section, select Profile > Login Settings > Two-Step Verification .
4. Tap the trashcan icon next to a phone number or trusted device.
Use face or fingerprint authentication
You can use Touch ID® or Face ID® with a compatible Apple device. With a compatible Android
device, you can use fingerprint authentication.
Your device must meet the following minimum requirements:
• Apple devices:
iOS version 10.3 or higher
A Touch ID compatible device (iPhone 5s, iPad Air 2, or newer)