8
Problem Solution
Smoke alarm does not sound when
testing.
Power source is depleted. Replace the
smoke alarm.
The alarm chirps with red LED ashing
once every 40 seconds.
Power source is depleted. Replace the
smoke alarm.
The alarm chirps every 40 seconds
and 16 seconds after each chirp, the
red light ashes once. This is fault
mode.
Clean smoke alarm. Refer to the
Maintenance and Cleaning section.
Replace the smoke alarm if the
problem persists.
Smoke alarm sounds unwanted alarms
intermittently or when residents are
cooking, taking showers, etc.
Press and hold in Hush button to
silence alarm.
Vacuum smoke alarm. Refer to the
Maintenance and Cleaning section.
Smoke alarm may be incorrectly
located. Move smoke alarm to new
location. See Installation section.
The alarm sounds different to normal. Clean smoke alarm. Refer to the
Maintenance and Cleaning section.
If there are still failures during warranty,
you can return to your retailer.
If the unit is out of warranty, please
replace it with a new alarm.
Troubleshooting
To Next Page
Loading...
