Armitage Shanks Sensorflow 21 A4168AA User Manual

Important:
1. Electrical connection: mains electric powered versions of these
products must be connected to a continuous permanent power supply.
2. Sensor protector: this black-out lens cover should only be removed
from the sensor after completing installation & at least 20 seconds
after powering up.
See page 3 for more details.
Sensorow 21 shower – panel mount
A4168AA, A4185AA & A4186AA
INSTALLER: After installation please pass this instruction booklet to user
IMPORTANT
BEFORE CONNECTION, FLUSH WATER THROUGH PIPEWORK TO REMOVE
ALL DEBRIS ETC. WHICH COULD DAMAGE THE VALVE MECHANISM
INSTALLATION
INSTRUCTIONS
Ø15
Ø15
Ø15
Ø15
67
40
61
103
86
116
max.30
3
Ø48
750
M33 x 1.5

Armitage Shanks Sensorflow 21 A4168AA Specifications

General

Range	Sensorflow 21
Manufacturer Code	A4168AA
Finish	Chrome
Power Supply	Battery
Mounting Type	Deck Mounted
Activation	Infrared Sensor
Material	Brass
Brand	Armitage Shanks
Water Saving	Yes
IP Rating	IP65
Color	Chrome
Product Type	Electronic Basin Tap
Spout Type	Fixed
Warranty	5 Year

Summary

IMPORTANT PRE-INSTALLATION NOTES

MAINS ELECTRICAL POWER SUPPLY

Ensures mains powered products use a continuous permanent power supply for correct operation.

SENSOR PROTECTIVE COVER

Keep sensor lens cover on until installation is complete and power is on for 20 secs.

PRODUCT BOX CONTENTS

SUPPLY CONDITIONS

WATER REGULATIONS

INSTALLATION GUIDE

MOUNTING THE SENSORS

Step-by-step guide for attaching the sensor housing to the panel and securing it.

PLUMBING OVERVIEW

Diagram and instructions for connecting the solenoid valve and inline service valve.

ELECTRICAL CONNECTION

Details on connecting the sensor cables to the solenoid valve and PSU.

SHOWER OPERATION

SENSOR RANGING & RUN TIME ADJUSTMENT

MANUALLY CHANGING SENSOR RANGE

Procedure to adjust the sensor's detection range manually.

MANUALLY CHANGING RUN TIME

Procedure to adjust the shower's water flow duration manually.

EXTENSION CABLES

MAINTENANCE

SOLENOID VALVE

Troubleshooting and cleaning procedures for the solenoid valve.

HYGIENE FLUSH (AUTOMATIC)

Details on the automatic hygiene flush function and its programming.

ISOLATING VALVE

Instructions for installing and using the isolating valve for maintenance.

CLEANING CHROME SURFACES

SPARE PARTS

SELECTION OF OUR FIXED SHOWER HEADS