Armitage Shanks Sensorflow 21 A4185AA - User Manual

Important:
1. Electrical connection: mains electric powered versions of these
products must be connected to a continuous permanent power supply.
2. Sensor protector: this black-out lens cover should only be removed
from the sensor after completing installation & at least 20 seconds
after powering up.
See page 3 for more details.
Sensorow 21 shower – panel mount
A4168AA, A4185AA & A4186AA
INSTALLER: After installation please pass this instruction booklet to user
IMPORTANT
BEFORE CONNECTION, FLUSH WATER THROUGH PIPEWORK TO REMOVE
ALL DEBRIS ETC. WHICH COULD DAMAGE THE VALVE MECHANISM
INSTALLATION
INSTRUCTIONS
Ø15
Ø15
Ø15
Ø15
67
40
61
103
86
116
max.30
3
Ø48
750
M33 x 1.5

Summary

IMPORTANT PRE-INSTALLATION NOTES

PRODUCT BOX CONTENTS

SUPPLY CONDITIONS

WATER REGULATIONS

INSTALLATION GUIDE

Mounting the sensors

Details the procedure for securely mounting the sensor housing through a panel.

Plumbing Overview

Illustrates the pipe-work connections for the solenoid and service valves.

Electrical connection

Explains how to connect the sensor, solenoid valve, and PSU to the mains power supply.

SHOWER OPERATION

SENSOR RANGING & RUN TIME ADJUSTMENT

Remote Sensor Programming Unit

Describes a handheld unit for adjusting sensor range and other functions.

EXTENSION CABLES

MAINTENANCE

SOLENOID VALVE

Provides troubleshooting and maintenance steps for the solenoid valve.

Hygiene flush (Automatic)

Explains the automatic hygiene flush feature and its programming.

Isolating valve

Details the installation and use of the built-in isolating valve for maintenance.

CLEANING CHROME SURFACES

SPARE PARTS

SELECTION OF OUR FIXED SHOWER HEADS

Armitage Shanks Sensorflow 21 A4185AA Specifications

General

Brand	Armitage Shanks
Model	Sensorflow 21 A4185AA
Category	Plumbing Product
Language	English