11
TROUBLESHOOTING
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
PROBLEM POSSIBLE CAUSE SOLUTION
The vacuum will not
operate.
No power supply.
Check power supply - vehicle
battery, 12V power socket, cord,
breakers, and fuses.
Faulty power cord.
Unplug and check the power cord.
If damaged, have it repaired by a
professional.
Dust is being released
through the vents.
The lter is missing or damaged. Attach or replace the lter.
Reduced eciency and
motor/speed vibration.
There are blockages in the
nozzle, or the vacuum inlets.
Unplug and check nozzle, and inlets
for blockages.
The lter is clogged by ne dust.
Take o the lter and clean it or install
a new lter.
Dust cup full.
Empty the dust cup and clean the
lter.
To Next Page
Loading...
