ArmorAll AA256 User Manual (English)

Questions and Answers:

B
Brittany HuntJul 27, 2025
What to do if my ArmorAll Vacuum Cleaner will not operate?
- A
  ashleysnyderJul 27, 2025
  If your ArmorAll Vacuum Cleaner isn't turning on, here's what to check: * **Power Supply:** Ensure the vacuum is properly connected to a functioning power outlet. Check the cord, breakers, and fuses. * **Power Cord:** Inspect the power cord for any damage. If you find damage, unplug the vacuum and get the cord repaired by a qualified professional. * **Collection Tank:** If the collection tank is full, empty it. * **Switch Position:** Make sure the power switch is in the 'ON' position. Press the ON ‘I’ button on the power head.
Y
ywadeAug 3, 2025
Why does dust come out from the motor cover of my ArmorAll AA256?
- C
  Casey HarmonAug 3, 2025
  If dust is escaping from the motor cover of your ArmorAll Vacuum Cleaner, the cause may be: * The reusable cloth filter is either missing or damaged. Attach or replace the reusable cloth filter. * There might be blockages in the nozzle, hose, or the collection tank inlets. Unplug the vacuum and inspect these parts for any obstructions.
R
rblackwellAug 10, 2025
Why does my ArmorAll AA256 have reduced efficiency and motor/speed vibration?
- J
  Jerry SchneiderAug 11, 2025
  If your ArmorAll Vacuum Cleaner experiences reduced efficiency and motor vibration, it could be due to: * A blockage in the nozzle, hose, or vacuum inlets. * A dust filter blocked by fine dust. To resolve this, check the nozzle, hose, and inlets for any obstructions. Also, remove and clean the dust filter, or replace it with a new one if necessary.
K
Karen SmithAug 18, 2025
What to do if dust comes from the motor cover of my ArmorAll Vacuum Cleaner?
- J
  Jennifer MoranAug 19, 2025
  If dust is coming from the motor cover of your ArmorAll Vacuum Cleaner, it's likely that the reusable cloth filter is either missing or damaged. Attach or replace the reusable cloth filter to resolve this issue.