ARMORDILLO CR 2 User Manual

IMAGE IS FOR REFERENCE,
SHOWN WITH ADDITIONAL ACCESSORIES
CR 2 Chase Rack
STOP
Verify part and application is correct before proceeding.
If missing part or damage item please customer service directly.
Monday - Friday 9am-6pm PST (909)895-4522
Email - SUPPORT@ARMORDILLOUSA.COM
We strongly recommend reading through the installation
guide before installation.
1/2020 2000 REV2
ARMORDILLO RECOMMENDS PROFESSIONAL INSTALLATION ON ALL THEIR PRODUCTS
WARNING: When working on ,under or around vehicle exercise caution. If working without a lift check vehicle owners manual for correct jacking points.
Always wear safety glasses and ensure a safe working area. Serious injury or death could occur if safety measures are not followed.
PERIODICALLY CHECK TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CARE
To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the
finish. Do not use any type of polish or wax that may contain abrasives, that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish.
Mild soap may be used to clean bull guard.
For color finishes: Regular waxing is recommended to add a protective layer over the finish.
Mild soap may be used to clean the bull guard.
ARMORDILLO products are designed as decorative accessories and should not be relied upon as protection for the vehicle or passengers. Buyers assume all
risk and liability whatsoever resulting from installation and use of ARMORDILLO products. ARMORDILLO assumes no liability for injury, loss, incidental or
consequential damages in the event of an accident.
ARMORDILLO guarantees the original purchaser a LIMITED 5 YEAR WARRANTY from data of purchase against manufactured defects in materials,
workmanship and finish under normal use. This excludes damage resulting from road hazards, debris, product misuse, improper installation, impairments from
accidents, neglect, shipping or product modification. This warranty applies only to new products and is limited to the repair or replacement of ARMORDILLO
products. Warranty does not included cost of removal, installation, labor, freight, inconvenience, or consequential damage. Original purchaser must return
defective merchandise to the original place of purchase and must provide the proof of purchase.
21912 Garcia Ln, Walnut, CA 91789 (909) 895-4522
WWW.ARMORDILLOUSA.COM
SUPPORT@ARMORDILLOUSA.COM

ARMORDILLO CR 2 Specifications

General

Brand	ARMORDILLO
Model	CR 2
Category	Racks & Stands
Language	English

Summary

General Information and Warnings

Product Safety and Installation Recommendation

Recommends professional installation and emphasizes safety precautions.

Product Care and Maintenance

Provides guidelines for cleaning and protecting the product's finish.

Parts, Tools, and Preparation

Parts List and Identification

Lists all components included in the kit for verification.

Required Tools for Installation

Specifies the necessary tools for performing the installation.

Installation Preparation Tips

Offers advice for a successful and safe installation process.

Installation Walkthrough

Step 1: Assemble Main Panels

Connects the driver side panel and middle section using bolts and washers.

Step 2: Attach Support Bars

Connects the driver side support bar to the side panel with hardware.

Step 3: Position and Mark Mounting Holes

Places the rack on the truck bed, marks holes, and drills pilot holes.

Step 4: Install Nutserts/Rivet Nuts

Installs nutserts into drilled holes, with instructions for tool usage.

Step 5: Attach Chase Rack to Bed

Secures the chase rack to the truck bed using supplied hardware.

Step 6: Mount 3rd Brake Light Holder

Attaches the 3rd brake light holder to the chase rack cross bar.

Step 7: Connect 3rd Brake Light Wiring

Guides wiring connection for the 3rd brake light, recommending professional help.

Step 8: Final Inspection

Ensures all hardware is secure and tight after installation is complete.

Wiring Information and Safety

Wiring Diagram and Connections

Illustrates the electrical circuit for the product's wiring system.

Electrical Work Safety Warning

Warns against attempting electrical work without proper knowledge and expertise.