4
REV 3 02/21/2018
P-2932
P-2932
ARNOTT AIR SUSPENSION COMPRESSOR
FORD EXPEDITION/LINCOLN NAVIGATOR
CHASSIS: UN173 2WD/4WD, U228
1. USING THE PLASTIC DRYER PLUGS SUPPLIED WITH THE NEW COMPRESSOR, PLUG THE EXTRA HOLES
IN THE TOP OF THE AIR DRYER. THESE PUSH IN LIKE THE AIR LINE.
'97-'02: 4WD MODELS USE TWO (2) AIR LINES, WHILE 2WD MODELS USE ONLY ONE AIR LINE.
'03-'06: USE ONLY (1) AIR LINE REGARDLESS OF 4WD or 2WD
AIR SUSPENSION COMPRESSOR INSTALLATION
1. INSTALLATION IS IN THE REVERSE ORDER OF AIR SUSPENSION COMPRESSOR REMOVAL.
ADHERE TO ALL MANUFACTURE’S SPECIFICATIONS FOR TORQUE VALUES. SECURE INTAKE BAFFLE
IN A SUITABLE LOCATION AWAY FROM MOVING PARTS OR HEAT SOURCES.
PRE-ASSEMBLY OF THE AIR SUSPENSION COMPRESSOR
Tighten all nuts and bolts to manufacturer's specications during the installation process.
To Next Page
Loading...
