Aroma AWK-701 - Using the Tea Infuser

USING THE GLASS & USING THE TEA
STEW POT (CONT) INFUSER
4. Always use the glass stew pot lid when using the Ca ution: The provided tea infuser can be used fo easily steep
glass stew pot. Place the glass stew pot lid inside loose leaf teas and other smaller ingredients to prepare
the middle of the removable silicone ring. The a variety of different delicious teas. To use, follow the
water level will rise slightly above the 1.25L line. instructions below:
1. Place the power base on a sturdy, level and
touch the glass body or dry surface.
kettle lid until the kettle 2. Press thelid release buttons and remove the
has cooled completely. kettle lid. Fill with the desired amount of water.
Water must be filled between the MIN and MAX
levels.
3. Add desired ingredients inside the tea infuser.
Place the kettle lid on top of the tea infuser and
press to secure.
6. Plug the power cord into an available 120V AC
wall outlet.
7. Press the control dial fo turn on the unit. The unit
will beep fo signify it has been powered on.
8. Turn the control dial until the desired function
is selected. With every turn of the control dial,
the unit will beep and the selected function's
indicator light will iluminate.
9. Once selected, press the control dial fo inifiate
the function. The unit will beep as the selected
function begins its heating cycle.
10. When finished, press Cancel then press the
control dial to power off the unit. Using heat-
resistant gloves or oven mitts, carefully remove
the glass stew pot with the removable silicone
ring and the glass stew pot lid still intact.
11. Once the unit s off, safely unplug the power cord
from the wall outlet.
4. While pressing the lid release buttons, place the
tea infuser with the kettle lid attached into the
middle of the detachable stainless steel ring.
continued on next page>>