Aroma AWK-701 - Keep Warm Operation; Custom Automatic Keep Warm

16. KEEP WARM
1. Place the power base on a sturdy, level and
dry surface.
2. Press the lid release buttons to remove the kettle
lid. Fill with the desired amount of liquid. Liquid
must be filled between the MIN and
MAX levels.
3. While pressing the lid release buttons, place the
kettle lid on securely then carefully place the
kettle onto the power base.
4. Plug the power cord info an available 120V AC
walloutlet.
5. Press the control dial to turn on the unit. The unit
will beep to signify it has been powered on.
6. Turn the control dial fo select function 16. Keep
Warm. The unit will beep and the 16. Keep Warm
indicator light willilluminate.
7. Press Keep Warm Setting to adjust the
temperature from 113°F to 193°F. Each press
willincrease the temperature by 10 degree
increments.
8. Press Time Setting to adjust the duration of Keep
Warm mode from 110 8 hours. Each press will
increase the fime by 1hour increments.
9. Press the control dial to begin heating to the input
temperature or the default temperature. The
kettle will be kept at this temperature until the
input time or default time has expired.
10. When finished serving, press Cancel then press
the control dial to power off the unit. Once the
unit s off, safely unplug the power cord from the
wall outlet,
CUSTOM AUTOMATIC
KEEP WARM
CUSTOM AUTOMATIC
KEEP WARM (CONT)
Press the control dial fo begin the function's
heating cycle.
. After the selected function's cycle has
completed, the kettle will enter the custom
Keep Warm mode and remain at the input
temperature for 1 hour.
TIME SETTING
16.
To set a custom Keep Warm temperature fo be
implemented after a selected function's cycle has
completed, follow these steps:
1. Press Keep Warm Setting after selecting the
desired function.
2. To set a custom Keep Warm temperature, press
Keep Warm Setting fo increase the temperature
by 10 degree increments until the desired
temperature is flashing on the digital display.
Place the power base on a sturdy, level and dry
surface.
Press the lid release buttons to remove the kettle
lid. Fill with the desired amount of water and/or
ingredients. Liquid must be filled between the MIN
and MAX levels.
Place the kettle lid on securely then carefully place
the kettle onto the power base.
Plug the power cord info an available 120V AC wall
outlet.
Press the control dial to turn the unit on. The unit will
beep fo signify it has been powered on.
. Turn the control dial until the desired function is
selected. The Time Setting feature is available for
all functions EXCEPT 01. Boil and 15. Milk Formula.
Press Time Setting to adjust heating time. Each
press willincrease the time by one minute
increments.
Press the control dial to initiate the selected
function. The kettle will heat for the amount of time
that was set and switch to Keep Warm once the
time has expired.
When finished serving, press Cancel then press
the control dial to power off the unit. Once the unit
is off, safely unplug the power cord from the wall
outlet.