FAB
I
ntelligent
C
ontrollerr
b. The strong lighting
Open the basic lighting equipments and additional ones;
Close the non-display lighting equipments;
1.3 Requirements for the illumination during non-display time
Close the basic lighting equipments and additional ones;
Open the non-display lighting equipments;
1.4 Test switch
All the lamps will be turned on when the switch is pressed.
The program dialogue is shown as below:
Q1: connected to the non-display lighting
Q2: connected to the additional lighting in display time
Q3: connected to the basic lighting in display time
92
Description:
I1: connected to the detect test switch
I2: connected to the light sensitive switch
To Next Page
Loading...
