Array electronic SR Series

To Next Page

To Previous Page

Controladores lógicos programables PLC baja gama expandibles entradas digitales AC 74368-SR22MRDC ARRAY Manual Ingles www.viaindustrial.com

Parameters] in [Option] to select the two values of the linear relationship as in Fig. 3.1

and Fig. 3.2. (If the sensor tests the 0¡æ first and then tests a 50¡æ. Through these tow

times test, it will get the value of A and B. And then put the value of A and B into the

main machine.)

Please refer to the details of SR-WRT for the methods how to set the value

of A and B in SR-WRT.

Notes: The value of A and B of each analog pin need to be set separately.

Fig. 3.1

Fig. 3.2

Fig. 3.3

Fig. 3.4

CMPR will compare the calculated value of the input 1 and input 2. When the

comparison function is selected as “¡´”, it means the calculated value of input 1 is

smaller than that of input 2 and the output is high. Otherwise it will be low.

And the value of input 1 or input 2 can be select as the fix value, and the other is

Operation procedures are as the next page.

Here it will calculate the value of A and B. And Click here, it will

write the value of A and B of the IA0 pint into SR main machine.

Array electronic SR Series - Page 41