Array electronic SR Series User Manual

Controladores lógicos programables PLC baja gama expandibles entradas digitales AC 74368-SR22MRDC ARRAY Manual Ingles www.viaindustrial.com
Controladores lógicos programables PLC baja gama expandibles entradas digitales AC 74368-SR22MRDC ARRAY Manual Ingles www.viaindustrial.com
(3). When you use the voice module, you must record messages firstly, and the
system messages No.01, No.02, No.03 and No.04 have the following
functions.
Message 0: prompt the user press 0 key and listen to the telephone.
Message 1: prompt the user to enter the password.
Message 2: prompt the user the correct password.
Message 3: prompt the user the wrong password and re-enter the password.
Message 4: prompt the user the system is running normally and no alarming.
¡ñ Telephone Alarm
When the input of DOUT instruction was activated, it will start to dial the preset
telephone number.
¡ñ Automatic Dial and Automatic Alarm.
Examples for the application of SR-VPA /VPD, please refer to Chapter VI.
Notes: When programming with SR-HMI, the input of the telephone number must be
ended with “:”. And the characters before “:” is the preset telephone number. And the
telephone number after “:” is inefficient. And “:” is the mark for the end of the telephone
number. If there is no “:”, then SR cannot recognize the telephone number.
3.3.5 D-IN (Need to select SR-VPA/VPD to use together)
Line diagram/ Symbol in
SR
Function Pin Description
Telephone
dials the
voice
module to
input.
Input
TRG
When TRG become 1, will activate D-IN
instruction, and will play the preset message
Function description:
1. After D-IN instruction was activated, the voice module will start to play the preset
messages in D-IN instruction;
2. According to the different presetting in the D-IN instruction, the voice module has
the following applications:
(1). If there is only one D-IN instruction in the user’s program of the SR:
A£® If there is password protection, voice will play the No.01 message repeatedly,
after the user enter the correct password, if the entered password is wrong, the
voice will play the No.03 message, and then continue to play the No.01 message;
if the entered password is correct, the voice module will play the No.02 message,
and then play the preset alarm message which was set in the D-IN instruction by
user for 3 times, after playing 3 times, the voice will stop playing any message.
Then will hang off the telephone automatically after 20 seconds delay, and go
back to waiting status;
B£® When there is no password protection for D-IN instruction, voice module will
play the preset message which was set in D-IN instruction by user for 3 times,
after finish playing, the voice module will stop to play any message, and will

Array electronic SR Series Specifications

General

Brand	Array electronic
Model	SR Series
Category	Controller
Language	English