<EN>
<< On pressing , the green
light flashes; on keying in the
code a beep sounds with each
touch; but, on pressing
4 short beeps sound and the
light goes off.
<< You are pressing the keys
normally, but after a few
seconds, the light goes off and
the keys are not working.
<< You are carrying out the
opening process normally and,
when you press , the conti-
nuous green light comes on but
after a few seconds it turns off
and you cannot turn the key.
<< The safe is emitting a beep
every 5 seconds and, when you
try to press any key the safe
will not work.
<< On pressing , the red light
comes on flashing.
<< After changing the batteries
the safe continues with the red
light instead of the green.
<Theenteredcodeisincorrect,
try again.
<Toomuchtimehaspassedbet-
weenpressingtwokeys.Youhave
amaximumof15secondsbetween
pressingtwokeys.Afterthistime
thesafecloses.Repeattheprocess.
<Youhavetakentoolongin
turningtheknob.Afterpressing
youhave3secondstoturnthe
knob.
<Thesafeisblocked,because
someone has keyed in an incorrect
openingcode5timesinarow.
Wait15minutesandthesafewill
unblock automatically. Then you
can continue as normal.
< The safe is warning you that
the batteries are running out. The
safe is able to carry out several
openingsaftertheappearanceof
theredlight.Evenso,youshould
not rely on this and should change
thebatteriesassoonaspossible.
<Itisusualthatafteropening
thesafeforthersttwoorthree
times after changing the batteries
the safe continues using the red
light.Checkthatitreturnstousing
the green light by carrying out
severalconsecutiveopenings.If
theproblempersistscheckthat
you have inserted the batteries
correctly.
BEFORE CALLING THE TECHNICAL SERVICE,
CHECK: