To Next PageTo Next Page
Need help?Do you have a question about the Arregui PLUS C and is the answer not in the manual?
Details battery installation, external feed connection, and entering the factory user code for initial opening.
Covers turning the key and knob, battery requirements, and the procedure for closing the safe.
Instructions for entering codes, turning the knob, and understanding error messages and lockouts.
Procedure for closing the safe by turning the knob counter-clockwise.
Step-by-step guide to change the user code, including confirmation.
Procedure to change the super-user code, requiring current code and new code confirmation.
How to enable the delay feature and set the time duration from 01 to 99 minutes.
Steps to disable the opening delay function by setting the timer to 00 minutes.
Option to mask code entry with asterisks or display digits directly.
Configuring sound volume at four different intensity levels, including mute.
Instructions for opening the safe using the emergency key when codes are unknown or the system fails.
How to connect an external battery pack or USB power source for operation.
Understanding 'HI-BAT' and 'LO-BAT' indicators for battery levels.
Guide on how to open the battery carrier and replace the 4 AA batteries.
Guidelines for embedding the safe, including drilling, mortar application, and drying.
Information on safe rim locks, affixing methods, and security warnings during installation.
Lists safe references tested and classified according to UNE EN 14450:2007 and EN1300.
Details the 24-month guarantee period, exclusions, and requirements for claims.
General
