EasyManua.ls Logo

Arregui PLUS - Instructions; Opening for the First Time; Opening and Closing the Safe; Changing the Opening Code

Arregui PLUS
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
•Inordertoopenthesafeforthersttime,see point:
1. “Opening for the first time”.
•For subsequent openings of the safe, enter an
opening code and then turn the key. Initially the
programmedcodeis1234.Todiscoverhowtoopen
andclosethesafe,see point:
2. “Opening and closing the safe”.
•Forsecurityreasons,itisimportanttochangethe
initialcodeandintroduceapersonalnumberdecided
byyou.Thenewcodecanhave1 to12 digits. To
discover how to change the code, see point:
3. “Changing the opening code”.
•In order to activate the opening delay function,
see item:
4. “Opening delay function”.
• If any anomaly occurs, if the batteries go at for
example, the safe has an emergency key and an
externalbatterychargerthatwillsolvetheproblem.
See point: 5. “Emergency opening” and 6. “Use
of the external battery charger”.
In any case, in order to avoid the batteries going
at,see point:
7. “Condition of the battery indicator”.
•Do not remove the identication sticker with the
safenumberthatyouwillndonthefrontofthe
safe and at the beginning of these instructions,
since you will need it in order to request emergency
openings,sparepartsetc.
1. OPENING FOR THE FIRST TIME:
Whenopeningthesafeforthersttime,proceedinthe
following manner:
•Puttheemergencykey,whichisintheenvelope,into
the lock.
•Turnithalfaturntotheright(clockwise).
INSTRUCTIONS
WARNING:
Eachtimeakeyispressed,thesafeemitsashort
beep,whichmeansthatitwaspressedcorrectly.
Ifmorethan15secondspassbetweenpressing
twokeys,thesafewillclose.Inthisevent,repeat
theprocess.
•Thenturnitahalfturntotheleft(originalposition)and
remove the key.
•Openthesafewiththeusualkey(2halfturnstothe
right).
Inordertofunction,thesafeneeds4x1.5Valkaline
batteriesthatareplacedinthebatteryholder located
atthebackofthedoor.Inorderto insert them,open
thecoverofthebatteryholderandplacethebatteries
accordingtothediagramthatisfoundontheinside.On
completionofthisprocesstheelectronicsystemwillbe
activated.
Toclosethesafe,simplyturnthekey2halfturnstothe
left(anti-clockwise).
2. OPENING AND CLOSING THE SAFE:
•PresstheONkey.Thedisplaywillshow“----“
•Type your personal code of opening. The display will
showthedigitsayoutypethepassword.Wheneveryou
typeawrongcodeduringtheprocess,youwillbeableto
enteritagainbypressingON.
•Press the
key and turn the key two half turns in
thelocktotheright(clockwise). If the typed code is
correct, thedisplaywillshow“OPEN”forveseconds
andyouwillhearalongacceptancebeepwhileyouwill
havethetimetoturnthekeyinandopenthesafe.
If the code is not correct, youwill hear 4 short and
deepbeeps,andthedisplaywillshow“ERROR”. In this
event,repeattheprocess.The safewillallowupto5
incorrectcodeentriesbeforebecomingblockedfor15
minutesasasecuritymeasure,duringwhichitwillemit
abeepevery5seconds.Duringthistime,thekeyboard
willremainlockedanddisplay“HOLD”.
Wheneveryoudonotwish,duringtheopening,thatthe
accesscodeshowsinthedisplay,proceedasfollows:
•Press the ON key. The display will show “----“. Press
againtheONkey.Thedisplaywillshow“____”again.
•Type your personal code of opening. The display will
show“-“.Whenever youtype a wrongcode during the
process,youwillbeabletoenteritagainbypressingON.
•Pressthe
keytoconrm.
To close the safe,simplyturnthekey2halfturnsto
theleft(anti-clockwise).
3. CHANGING THE OPENING CODE:
Theinitialopeningcodeforthesafeis1234.Tochange
it,proceedinthefollowingmanner:
•Openthesafeanddonotcloseituntiltheprocesshas
been concluded.
• Introduce a blunt object (e.g. a pen) into the circular
holethatisonthebackofthedoor,untilitreachesits
limit.Thesafeemitsalongbeepatthebeginningofthe
changingprocess.Thedisplaywillshow“----“
•Enterthenewcodethatyouhavechosen.Remember
thatitmusthaveaminimumof1andamaximumof12
digits.Thedisplaywillshowthedigitsyoutyped.
•Pressthe
key.
123
456
789
0
<EN>

Related product manuals