Arregui PLUS - Opening Delay Function; Delay Function Activation; Delay Function Deactivation; Emergency Opening

•Thedisplaywillshow“REPEAT“.Enteryournewcodefor
a second time. This way the system checks that there
wasnoinvoluntaryerrorthersttimeitwasentered.
•Pressthe
key again.
Thesafewillsendoutalongbeepofacceptance,and
thedisplaywillshow“YES”whenevertheprocesshas
beencorrectlycompleted. Incase of error, it willsend
outfourshortbeepsandthedisplaywillshow“ERROR”.
In this second case the opening code has not been
changedandyouwillhavetorepeattheprocess.
4. OPENING DELAY FUNCTION:
Thissafepossessesadelaysystem,whichaddsadelay
fromthemomentwheretheopeningcodeisintroduced
uptotheopeningbecomeseffective(from01upto99
minutes).
4.1 Delay function activation:
•Inputusercode:ON
USERCODE(XXXX) ENTER
•Withinthefollowing5seconds,input:ON
789 ENTER
ThewordDELAYwillappearonthescreen
•Inputthenumberofminutesthesafewilltakeinorderto
unblockitselffromthemomentyouinputyouropening
code,bythemeansofavaluewith2digitsfrom01up
to99.
•The activation is successful. Within the last minute of
delay, a countdown will appear on the screen prior to
unblocking itself.
4.2 Delay function deactivation:
•Inputusercode:ON
USERCODE(XXXX) ENTER
•Withinthefollowing5seconds,input:ON
789 ENTER
ThewordDELAYwillappearonthescreen
•Input00inordertodeactivatethedelayfunction.
5. EMERGENCY OPENING:
 Together with these instructions an envelope is
providedwhichcontains:
5.1. An emergency key:
In case you do not remember your opening code, or
the safe suffers some anomaly, such as the batteries
goingat,etc.,youcan openthesafebymeansofan
emergency key.
 Todothis,proceedinthefollowingmanner:
•Puttheemergencykeyinthelock.
•Turnithalfaturntowardstheright(clockwise).
•Thenturnithalfaturntowardstheleft(initialposition)
and remove the key.
•Openthesafewiththenormalkey(2halfturnstowards
the right). On completing the process the electronic
system will reactivate.
5.2. An emergency code:
In the event that you cannot rememberyourpersonal
code,youcanopenthesafebypressingthisemergency
codeinsteadofyourusualoneandfollowingthesteps
indicatedinpart2.Foryoursecuritywerecommendnot
changingthiscode.Ifyouneedtochangeit,followthese
instructions:
•Openthesafeanddonotshutituntiltheprocesshas
been concluded.
•PresstheONkeyandthenkey8.
•Introduceabluntobject(e.g.apen)intothecircularhole
thatisonthebackofthedoor,untilitreachesitslimit.
The safe emits a long beep for the beginning of the
changingprocess.Thedisplaywillshow“----“
• Enter the valid emergency code (that which is in the
envelopeifitistherstchangeorthatnowprogrammed
inifyouhavepreviouslychangedit).
•Pressthe
key.Thedisplaywillshow“NEWCODE”for
3secondsand,subsequently,“----“.
•Enterthenewemergencycodethatyouhavedecided
on.Rememberthatitmusthaveaminimumof1anda
maximumof12digits.
•Pressthe
key.
•Thedisplaywillshow“REPETITION”for3secondsand,
subsequently, “----“. For verication re-enter your new
emergency code.
•Pressthe
key again.
 Thesafewillsendoutalongbeepofacceptance,andthe
displaywillshow“YES”whenevertheprocesshasbeen
correctlycompleted.Incaseoferror,itwillsendoutfour
shortbeepsandthe displaywillshow“ERROR”.Inthis
secondcasetheopeningcodehasnotbeenchangedand
youwillhavetorepeattheprocess.
6. USE OF THE EXTERNAL BATTERY CHARGER:
In the case the safe runs out of battery and you dot
havetheemergencykey;youcanopenthesafebythe
means of the external charger. Proceed in the following
manner:
•Place4batteriesof1.5Vintheexternalcharger
•Insertthechargerconnectorinthepowersocketlocated
at the left side of the keyboard.
•Oncethedisplayison,openthesafenormally.
7. CONDITION OF THE BATTERY INDICATOR:
 Eachtimeyouusethesafe,theelectronicsystemchecks
the batteries condition and the display will show the
samebythemeansofabatterypictographreecting3
levels.
 Wheneverthedisplayshowsalowlevelofbattery,you
willhavetoreplacethebatterieslocatedon theback
side of the door. The safe is prepared to be opened
severaltimes with a lowbattery.However, do notbe
over-condent and replace the batteries as soon as
possible.
REMEMBER:
Neverkeeptheenvelopecontainingthe
emergency key and emergency code inside the
safe,incaseyouneedtousethem.