ARRI - ORBITER
Short Manual
ARRI ORBITER FULL MANUAL: WWW.ARRI.COM
WARNING:
Lamphead and systems may only be operated and used by qualified persons.
Safety Concerning
Fire/Burns/Radiation (UV, VIS, IR):
Always Observe the minimum distances stated
on the type plate to allow light and heat radiation
to disperse safely. This will prevent danger to
persons and objects.
Lampheads must be placed at sufficient distance
from flammable materials or objects. The
minimum distance to lit objects written on the
lamphead describes a max. temp. of 90 Degrees
Celsius in spot-focus on the lit object.
DO NOT COVER ANY
VENTILATION SLOTS ON THE
LAMPHEAD!!!
______________________
Do not move lamphead past tilt angle
stated on the type plate as this might
cause the lamphead to overheat.
Do not operate the lamphead with
closed barndoors or an excessive
number of scrims, as this might also
cause overheating
Do no open the housing of the
Orbiter. For safe operation, the housing
must be completely closed at all times.
Take appropriate precautions when
lighting glass, windows and
decorative surfaces. These materials
can burst when they become hot.
A faultless function of the power supply
and protection system must be ensured
before connecting lamphead.
TYPE PLATE
To Next Page
Loading...
