Need help?Do you have a question about the ARRI L5 and is the answer not in the manual?
General| Brand | ARRI |
|---|---|
| Model | L5 |
| Category | Lighting Equipment |
| Language | English |
Details the meaning of various warning symbols used in the manual.
Provides general instructions for safe product handling and operation.
Covers essential safety precautions for operating the device.
Highlights safety rules specific to the product's operation.
Covers product cleaning, contact care, and legal limitations.
Highlights key capabilities like focusability, beam characteristics, and color rendition.
Details product features, focus knobs, yoke, tilt-lock, DMX control, and unpacking contents.
Step-by-step guide for adjusting the stirrup for balance.
Instructions for attaching the spigot to the stirrup.
Covers mounting the device and attaching the safety cable correctly.
Covers pan/tilt, beam angle adjustment, and accessory mounting.
Details DMX/RDM, USB interfaces, and initial product startup.
Instructions for connecting and using a battery pack for power.
Provides an overview of the fixture menu structure.
Details the functions and indicators within the fixture menu.
Explains the functions of buttons and rotary knobs for menu operation.
Guides on setting color temperature, hue, saturation, and fan modes.
Covers setting DMX addresses and configuring signal loss behavior.
Instructions for selecting and configuring DMX operational modes.
Details on controlling display illumination and status indicators.
Steps to access operational hours, DMX, and firmware versions.
How to check recent temperature and display error status.
Describes shortcuts for demo mode, DMX address, and DMX mode.
Defines the structure and sub-menus within the fixture menu.
Configuration options for DMX modes, demo, indicators, and fan.
Provides guidance on using appropriate cables and termination for DMX links.
Step-by-step instructions for connecting DMX data links.
Lists standard RDM commands for device discovery and control.
Details extended RDM commands for status, labels, and device info.
Covers RDM commands for lamp hours, factory defaults, and power states.
Information on using the L-Series manager software for device control.
Lists additional error codes related to calibration, watchdog, and battery.
Details 16-bit DMX modes for Tungsten Tunable fixture.
Details 16-bit DMX modes for Daylight Tunable fixture.
Details 8-bit DMX modes for Color fixture.
Details RGBW DMX modes for Color fixture.
Details 16-bit White DMX modes for Color fixture.
Details 16-bit RGBW DMX modes for Color fixture.
Details 16-bit HSI DMX modes for Color fixture.
Details coarse/fine DMX modes for White/RGBW on Color fixture.
Details coarse/fine DMX modes for White on Color fixture.
Details coarse/fine DMX modes for HSI on Color fixture.
Details coarse/fine DMX modes for RGBW on Color fixture.
Formulas for converting CCT values to DMX and vice versa.
Covers dimensions, optical path, LED engine type, and color properties.
Details DMX channels, housing, installation, and connectivity ports.
Details AC power, voltage, noise emission, and thermal limits.
Lists safety approvals, included items, and available accessories.
Provides order codes for different product variants.
Details regulatory compliance for digital devices.
To Next Page
