Fixture Menu
28
Status Messages
From firmware-version 2.0
Note: The small, horizontal arrow in the displays indicates sub-menus. Press the ENTER button to access the sub-menus.
Note: In setup and status mode the options keep available until another function is called up. All other modes return to the
appropriate mode after 2 sec.
Level 1 Level 2 Level 3 Level 4 Description
STATUS
OK Product ready for operation, no errors
ERROR Error message (see “Error messages” on page 34)
SW Firmware version
DMX V X.X Version of the DMX protocol
HOUR XXXX t Hours of operation
XX.X°C Recent temperature of the light engine
VBAT XX.XV Recent voltage of the battery pack
To Next Page
Loading...
