Need help?Do you have a question about the ARRI SkyPanel and is the answer not in the manual?
General| Type | LED Soft Light |
|---|---|
| Color Temperature | 2800K - 10000K |
| CRI | ≥ 95 |
| Dimming | 0 - 100% |
| Control | DMX, Ethernet |
| Input Voltage | 100-240V AC, 50/60Hz |
Dimensions and technical drawing for SkyPanel S30 manual and P.O. versions.
Dimensions and technical drawing for SkyPanel S60 manual and P.O. versions.
Explanation of warning signs and general safety guidelines.
Specific warnings for operation, handling, and connection.
Guidelines for maintenance, light source replacement, and intended use.
Overview of SkyPanel, its benefits, and key features.
Description of product properties, components, and package contents.
Illustrations and labels for manual and P.O. versions and connector panels.
Illustrations of the power supply units for S60 and S30 models.
Safety warnings and instructions for mounting the stirrup and spigot.
Step-by-step guides for mounting the stirrup and safety brackets.
Final installation steps, including locking mechanisms.
Operation of pan/tilt and mounting accessories for beam shaping.
Details about USB, Ethernet, and DMX/RDM interfaces.
Table outlining different control methods and their capabilities.
Safety warnings and requirements for connecting to AC power.
Instructions for PowerCON and XLR connectors, and power through functionality.
Requirements and tips for powering the SkyPanel with a battery pack.
Illustration of the menu interface and controls for navigation.
Explanation of POWER, DATA, and STATUS LEDs and their meanings.
Description of menu controls and operating modes (CCT, HSI, GEL).
Adjusting color, brightness, and selecting dimming curves.
Configuring special modes, DMX address, and protocol.
Configuring signal loss behavior, fan modes, and display options.
Managing presets, settings, logs via USB, and performing a factory reset.
Explanation of available control modes and bit resolutions.
Details on CCT, HSI, RGBW, and GEL color control modes.
Explanation of Art-Net, IP addressing, and networking terms.
Features for merging Art-Net data and enabling the gateway.
Information on DMX data links, pin-outs, and cable types.
Advice on using shielded cables, splitters, and termination plugs.
Steps for connecting the DMX data input/output and terminating the link.
List of standard and extended RDM commands and their descriptions.
Commands for fixture status, fan mode, and reset functions.
Configuration for how the fixture reacts to DMX signal loss.
Table listing error codes, their descriptions, and recommended remedies.
Information on the ALSM software and download location.
Overview of Protocol V4.1 and SkyPanel-RP 8/16-bit modes.
Channel mapping for SkyPanel-C 8-bit modes (CCT, RGBW, HSI, GEL).
Channel mapping for SkyPanel-C 16-bit modes.
Channel mapping for SkyPanel-C Coarse/Fine modes.
Formulas for CCT/DMX conversion and tables of available gels.
Detailed physical dimensions, light source, and optical path specifications.
Electrical, noise emission, thermal limits, and connector specifications.
Lists of product versions, included items, and available accessories for S30.
Lists of accessories for S60 and all SkyPanel models.
Warning about optical radiation and information on product updates and service.
To Next Page
