ARRI SkyPanel User Manual

The Fixture Menu of the SkyPanel
33
• Select „Yes“ and press I/S to confirm the setting. Select „No“
to abort saving the preset list.
• The preset list will be saved on the USB memory stick.
Up to 30 preset lists can be stored in the root directory of the
USB memory stick. The file name is
<product serial number>-Presetxx.json. The SkyPanel is
looking for „Presetxx.json“ to identify a preset list on an USB
memory stick. Be sure to keep the string when renaming a pre-
set list. Otherwise the file will not be found by the SkyPanel.
To load a preset list:
• Connect an USB memory stick with one or more preset lists
to the USB-A connector of the SkyPanel.
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „USB Functions“ is selected. Press I/S to open
the menu.
• Turn I/S, until „Load Light Presets“ is selected. Press I/S to
open the list of the preset lists available in the root directory
of the USB memory stick.
• Turn I/S, to select a preset list.
• Press I/S to load the selected preset list. The internal preset
list of the SkyPanel will be overwritten by the selected preset
list.
To save and load Fixture Settings
The fixtures settings can be saved to an USB memory stick and
uploaded to another SkyPanel. The file contains all fixture set-
tings except the DMX address and IP settings.
To save the fixture settings:
• Connect an USB memory stick to the USB-A connector of the
SkyPanel.
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „USB Functions“ is selected. Press I/S to open
the menu.
• Turn I/S, until „Save Fix. Settings“ is selected. Press I/S to
open the menu.
• Select „Yes“ and press I/S to confirm the setting. Select „No“
to abort saving the fixture settings.
• The fixture settings will be saved on the USB memory stick.
Up to 30 fixture settings files can be stored in the root directory
of the USB memory stick. The file name is
<product serial number>-Clonexx.json. The SkyPanel is
looking for „Clonexx.json“ to identify a fixture settings file on an
USB memory stick. Be sure to keep the string when renaming
a fixture settings file. Otherwise the file will not be found by the
SkyPanel.
To load fixture settings to the SkyPanel:
• Connect an USB memory stick with one or more fixture set-
tings files to the USB-A connector of the SkyPanel.
• Press the MENU button (10) to open the fixture menu.

ARRI SkyPanel Specifications

General

Type	LED Soft Light
Color Temperature	2800K - 10000K
CRI	≥ 95
Dimming	0 - 100%
Control	DMX, Ethernet
Input Voltage	100-240V AC, 50/60Hz