Introduction
This information concerns the artemis Docking Brackets with blue Balance Pins
sold by ARRI from
2016 till May 2019 and Docking Brackets with red Balance Pins of artemis rigs
which had been updated to TRINITY from 2016 till May 2019:
K2.0010319 artemis Docking Bracket, 1.8 inch
K2.0010320 artemis Docking Bracket, 1.8 inch, 1.5 inch
NOTE
All Docking Brackets shipped since June 2019 have been already equipped with
the new stainless-steel Balance Pins.
Reason
The new pin is more robust than the old version.
Material required
2 x K4.0025601 (Balance-pin-kpl)
which is comprised of:
1 x K5.0011587 and 1 x 50.0025337
Tools required
•
Hammer
•
Punch (7mm)
•
Pliers
•
Green Loctite
To Next Page
Loading...
