Need help?Do you have a question about the ARRI TRINITY 2 and is the answer not in the manual?
General| Type | Camera Stabilizer |
|---|---|
| Model | TRINITY 2 |
| Stabilization | 3-axis stabilization |
| Pan Axis | 360° continuous |
| Tilt Axis | ± 45° |
| Roll Axis | 360° |
| Compatibility | ARRI cameras and other cameras |
| Storage Temperature | -20°C to 60°C |
| Humidity | 0% to 90% (non-condensing) |
Details on product identification, environmental conditions, and technical data.
Pin configurations for connectors and compliance information.
Information on product warranty, scope of delivery, and certifications.
Explains warning symbols, signal words, and safety message structure.
Covers electrical safety, handling, and preventing damage or injury.
Detailed view of the TRINITY 2 head and its components.
Explains the center post structure and the Master Grip overview.
Overview of the Remote Control Panel and Top/Bottom Stages.
Details on Battery Hanger and Mounting Systems.
Step-by-step guide for installing the TRINITY head and SAM plates.
Procedures for mounting the camera, adjusting COG, and tilt axis.
Instructions for installing and adjusting the center post and gimbal.
Guidance on mounting Master Grip and installing RCP-3.
Covers TST/BST, BHM-2, and BMS installation and operation.
Guidelines for cleaning the equipment and recommended agents.
Information on repair procedures and warnings for untrained personnel.
Instructions for proper packing, transportation, storage, and disposal.
Directory of ARRI service contacts worldwide.
List of accessories and part numbers for the RCP-3.
To Next Page
