Need help?Do you have a question about the ARRI SRH-3 and is the answer not in the manual?
Includes revision history, scope, and contact details.
Covers liability disclaimers and crucial product usage advisories.
Explains different risk levels and alert symbols used in the manual.
Details controls and connectors on the top, rear, and side panels of the remote.
Explains powering the panel/head and data connections (FS-CAN, Lemo).
Details RC Data, FF CAN BUS, Mini USB, Antenna, and LBUS connections.
Describes the function and operation of the emergency shut off switch.
Displays profile, axis indicators, assignments, and key functions.
Outlines default button and knob assignments for core functions.
Process for assigning/removing controller functions and making them touchscreen-only.
Covers Head, Controls, Endstops, Follow, Status, Settings, Service, Info, FIZ functions.
Sets head mounting position and accesses motor/PID settings.
Explains motor on/off, mode control, and PID main menu configuration.
Explains the proportional, integral, and derivative terms of PID control.
Guides through PID quick setup and the autotune feature for motor tuning.
Covers position submenu and controller assignment/unassignment.
Covers direction, deadband, ramp, and sensitivity settings for controllers.
Selects ramp modes and activates/deactivates all input devices.
Details assigning knobs for offset and adjusting its parameters.
Sets axis speed and speed ratio, useful for different lenses.
Allows setting axis limits and on/off control for endstops.
Enables/disables follow mode and adjusts its speed, deadband, and ramp.
Explains and guides on using True Horizon for Roll axis reset and framing.
Outlines the shot preset function, currently disabled.
Shows connection, LBUS, and expander status for remote and head.
Adjusts display rotation, brightness, and accesses High Dynamic Mode.
Manages wireless channel selection and regional compliance settings.
Covers restoring factory defaults and calibrating remote/head components.
Shows serial numbers and firmware versions for remote and head components.
Outlines FIZ setups, screen interface, and motor adjustments.
Allows selection, saving, and usage of user profiles.
Resets all user profiles to their factory default settings.
Details accessories for mounting monitors and receivers.
Lists available controllers and their functions.
Provides diagrams for various connector pinouts.
General| Type | Remote Head |
|---|---|
| Manufacturer | ARRI |
| Model | SRH-3 |
| Weight | 3.5 kg |
| Payload Capacity | 15 kg |
| Pan Range | 360° continuous |
| Power Supply | 24 V DC |
| Communication Protocol | ARRI Protocol |
| Slip Rings | Yes |
| Roll Range | 360° |
| Control Interface | Ethernet |
| Operating Voltage | 24 V |
| Operating Temperature | -20°C to +50°C |
To Next Page
