To Next PageTo Next Page
Need help?Do you have a question about the ARRI SRH-360 and is the answer not in the manual?
General| Type | Remote Head |
|---|---|
| Pan Range | 360° continuous |
| Tilt Range | +90° to -90° |
| Compatibility | Various camera types |
| Power Supply | 24 V DC |
| Payload Capacity | 30 kg / 66 lbs |
| Roll Range | 360° continuous |
Copyright and company details.
Manual's content overview and legal notice.
Guidance on remote head use, drift, and setup rigidity.
Emphasis on experienced users and reading the manual.
Explanation of DANGER, WARNING, CAUTION, and NOTICE symbols.
Identification of front-mounted parts and connectors.
Identification of rear-mounted parts and connectors.
List of compatible cables with part numbers.
List of power and data cables with part numbers.
Guidelines for attaching and securing the head to support systems.
Importance of ISO Dampers for stabilization.
Description of the Black-Tek damper features.
Recommended plates and accessories for camera mounting.
Procedure for attaching camera plates to the head.
Adjusting camera position for left-to-right balance.
List of compatible batteries and their sources.
Connection guide for head, control panel, and power.
Procedure for connecting RCP to the remote head.
Description of top and rear panel controls and ports.
Overview of default settings for quick operation.
Interface layout, navigation, and menu operations.
Choosing between Overslung and Underslung configurations.
Procedures for assigning controllers to functions.
List of controllers and their functions for assignment.
Adjusting speed, ramp, and locking controllers.
Step-by-step guide for initial PID setup.
Setting camera parameters for optimal performance.
Procedure to reduce vibrations using the Drop setting.
Using a knob for real-time Drop adjustment.
Defining and storing the remote head's default position.
Defining and enabling axis movement limits.
Procedure for precise adjustment of stop points.
Configuring Speed, Dead Band, and Ramp for synchronized movement.
Adjusting speed and dead band parameters.
Tuning the ramp parameter for smooth motion.
Viewing and switching between Low, Standard, and High modes.
Configuring response threshold and controller sensitivity.
Adjusting speed and angle ratios for perceived speed.
Controlling Pan motor and setting Speed/Angle modes.
Indicates feature unavailability in current software.
Connecting and configuring ERM-2400/ERM-900 modules.
Factors affecting wireless connection quality.
Mapping controllers for Focus, Iris, and Zoom.
List of compatible controllers for FIZ functions.
Adjusting speed and torque for FIZ motors.
Managing and copying settings between profiles.
Configuring startup behavior and backing up profiles.
Details on RCP, Mainboard, LBUS, and Expander versions.
Details on head's Mainboard, LBUS, and Expander versions.
Calibration and reset options for the RCP.
Maintenance and calibration for the remote head.
Procedures for calibrating head sensors and gyro.
Physical measurements and technical data of the system.
