Need help?Do you have a question about the ARRI ARRIMOTION and is the answer not in the manual?
General| Brand | ARRI |
|---|---|
| Model | ARRIMOTION |
| Category | Camera Accessories |
| Language | English |
Identifies potential hazards with symbols for operation and electric shock.
Provides essential safety rules to prevent injury and equipment damage.
Specific safety guidelines for operating the dolly system.
Details the system's safety mechanisms for stopping movement.
Lists features introduced in different software versions (1.0, 1.8, 2.0).
Introduces the ARRIMOTION system as a user-friendly alternative to complex motion control rigs.
Overview of the main controller modules and controlled head motors.
Illustrates system inputs, main controller functions, and controlled items.
Defines key terms like Encoder, Mimic, and Controller for system operation.
Lists system components with codes, identifiers, names, and descriptions.
Illustrates a basic system setup with ARRIHEAD and Lens Control System.
Lists necessary conditions and checks before setting up the ARRIMOTION system.
Details items to check before starting ARRIMOTION system setup.
Instructions for attaching the main controller to ARRIHEAD-1 and ARRIHEAD-2.
Guide on attaching CHM-1 motors to the ARRIHEAD for pan and tilt axes.
Instructions for connecting cables to the CCB-1 and CLM-2 motors.
Explains how to use the emergency stop button and reset the system.
Steps and precautions for powering up the ARRIMOTION system.
How the system automatically recognizes axes and assigns Mimics, or manual configuration.
Procedure for homing axes to establish their absolute positions.
Instructions for safely powering down the ARRIMOTION system.
Explains the Jogbox interface, screen layout, and button functions.
Lists and explains various status and warning symbols displayed by the system.
Step-by-step guide to recording a basic motion sequence.
Instructions on how to play back recorded motion sequences.
Procedures for managing recorded moves (save, load, erase, rename).
How to adjust gear ratios for axis response and precision.
How to set minimum and maximum movement limits for axes.
Details on the counter/status field during recording and playback.
Settings for camera synchronization and operation during moves.
Explanation of Stop Motion and Go Motion playback modes.
How to record moves axis by axis, building up a complex sequence.
How to change which input device controls which axis.
Configuring how the system handles mimic turning past an axis limit.
Using Jogbox features for examining and navigating moves.
Setting up relay outputs triggered by frame numbers.
Configuring the bloop light for exposing sync marks on film.
Selecting external trigger sources to start or stop moves.
How Arrimotion generates and synchronizes timecode with moves.
Controlling external VTRs for synchronization with Arrimotion.
Instructions for operating the Panther dolly in Arrimotion mode.
Common issues and solutions for system operation.
Options for loading/saving moves and setups, changing settings, and powering off.
Customizing system parameters for different needs and operators.
Configuring axis data and states, including real and capture axes.
Tools for setting up an axis and its controller, with configuration restrictions.
Configuring parameters for selected axes, with warnings about changes.
Managing axis-mimic relationships and related parameters.
Setting camera-related functions and selecting the connected camera.
Displays focus, iris, and zoom settings and manages conversion tables.
Core menu for creating, modifying, and replaying moves.
Functions for synchronizing Arrimotion with other devices or controlling them.
Moving axes independently or examining a move.
Information on using ARRIHEADs with Arrimotion.
Instructions for attaching the Head Adapter to mount the main controller.
Overview of main controller modules and working procedures.
Details of the CCB-1, its connectors, buttons, and power modes.
Details of the MCB-1, its connectors, and status LEDs.
Details of the LCB-1, its connectors, and status LEDs for lens motors.
Details of the ACB-1 for controlling external servo motors and equipment.
Details of CHM-1 motors, their function, and connection.
Description of the Jogbox JBO-1, its components, and input devices.
Using the JHC-1 as a central station for controlling the system.
Mounting the Jogbox using the cradle on ARRIHEAD or fluid heads.
Using the JCA-2 adapter for encoded fluid heads as a master head.
Function of the GPI-1 for triggering external events and system synchronization.
Used to expose sync marks on film with variable patterns and brightness.
Instructions for exchanging regular CLM-2 cables for longer CC-M2 cables.
Overview of controlling the Panther Evolution Dolly with Arrimotion.
Lists compatible cameras, lens motors, controls, and operating ranges.
To Next Page
