1. ARRIS CM3000PRO Parts
The ARRIS CM3000PRO Brushless Gimbal consists of the following items in the
package:
1.1 ARRIS CM3000PRO Gimbal
1.2 User Manual Disk
1.3 Wire for manual control the Gimbal
1.4 The video output and charge wire for GoPro
2. Important Notes
2.1. ARRIS CM3000pro needs 3 cell 11.1V batteries to give power supply. You can
use a separate battery or the battery on your mutlicopter to power it. DO NOT use
any other cell battery, it might cause damage to the controller or have a negative
impact on the gimbal.
2.2. When you connect the gimbal to computer through a USB cable, you will also
need to supply power to the gimbal via a 3S battery and keep the gimbal still in
order to ensure it connects to the computer
2.3. If you want to use all the functions of ARRIS CM3000pro, you need to make
sure there are 4 extra Channel on the Radio.
2.4. In order to ensure the normal operation of ARRIS CM3000pro, YAW should
connect with radio and do some setting. Then the gimbal can adjust the direction
effectively.
2.5. Before the initialization of the CM3000pro, please make sure that the front of
the gimbal stays the same direction as the front of the multicopter.
2.6. On the platform of the ARRIS CM3000pro, there are 4 holes for damper balls.
You can try different types of damper balls. Here is the link:
http://www.hobby-wing.com/gimbal-related-parts.html.
2.7. In any mode, you can manual control the direction of the Yaw Axis of the
gimbal.
3. How to Install the Gimbal
To Next Page
Loading...